Sicma Wood Chippers

Sicma Wood Chippers Manual Feed EC100

Eco Chipper 100’s transmission is run by a system of pulleys and belts (no direct drive) and therefore no clutch is required. Driveline (EUROCARDAN series 4) is instead equiped with a freewheel for absorbing inactivity when disengaged.

Sicma Wood Chippers Hydraulic Feed EC100-H

Eco Chipper 100’s transmission is run by a system of pulleys and belts (no direct drive) and therefore no clutch is required. Driveline (EUROCARDAN series 4) is instead equiped with a freewheel for absorbing inactivity when disengaged.

 

Features - EC100

The flywheel turns at 1620 r.p.m., and the hardened steel cutting blades are staggered (not aligned) for a better use of cutting power. The hopper is more inclined and allows a more efficient gravity feeding system. Through a lever, the reinforced discharge tube can be turned 360 degrees, in order to set the direction of shredded material. With a height of 1920 mm (76″), loading material into a bin or loader is easy. The flywheel has a pulley shaft. There are no welds on the Eco Chipper 100 for a seamless finish. This reduces vibration and noise. Eco Chipper 100 can be run with a minimum of 20 HP, absorbing less power than the competitive products.

Standard Equipment: Cat I 3 pt hitch, 540 rpm PTO, transmission is a system of pulleys & belts, 4 hardened steel cutting blades are staggered, reinforced discharge tube can be turned by 360̊, 5.75″ x 8.25″ feeding opening, 76″ high tube with deflector, 28″ x 28″ hopper, able to shred up to 4″ diameter trees.

Detail Description
Model EC100
Description Eco Chipper 100 – Manual Feed
Weight 608 Lbs
Horse Power 20 HP
Wood Size 4″ Diameter
Hopper Size 28″ x 28″
Number of Knives 4
Flywheel 4″ Diameter, 110 lbs, 1620 r.p.m.
Speed 540 r.p.m. P.T.O.

Features - EC100H

The flywheel turns at 1620 r.p.m., and the hardened steel cutting blades are staggered (not aligned) for a better use of cutting power. The hopper is more inclined and allows a more efficient gravity feeding system. Through a lever, the reinforced discharge tube can be turned 360 degrees, in order to set the direction of shredded material. With a height of 1920 mm (76″), loading material into a bin or loader is easy. The flywheel has a pulley shaft. There are no welds on the Eco Chipper 100 for a seamless finish. This reduces vibration and noise. Eco Chipper 100 can be run with a minimum of 20 HP, absorbing less power than the competitive products.

Standard Equipment:

  • Cat I, 3 pt hitch
  • 540 rpm PTO
  • Transmission is a system of pulleys & belts
  • 4 hardened steel cutting blades are staggered
  • Reinforced discharge tube can be turned by 360̊
  • 5.75″ x 8.25″ feeding opening
  • 76″ high tube with deflector
  • 28″ x 28″ hopper
  • Able to shred up to 4″ diameter trees
preloader