Sitrex HayMaker HM300

Model HM300, HayMaker

The Sitrex HayMaker is the most complete universal hay tedder for crops. It does an excellant job in spreading, tedding or windrowing. The HayMaker 300 has a high performance rate, is very simple to operate and has sturdy construction. The HM 300 is fitted with wide tires not only for good grip, but also to obtain better performance on rough terrains. The tines are positioned by centrifugal force and float at forage cut level to collect the whole crop.


This tedder evenly moves and spreads the hay while working at high speeds
to get a soft and loose swath and a precise windrow separation. It is equipped with adjustable deflectors to prevent losses on terrain boundaries.

HayMaker 300’s pivoting coupling allows the machine to follow the tractor thoroughly. When this hay tedder is lifted it locks automatically on the centre position in order to avoid lateral movement. This machine also locks on uneven ground. The centre dividing head provides even spreading which is necessary to avoid bunching of hay which might cause fermentation. The deflectors are adjustable to allow the turning of the hay when they are open wide. They can also be closed following working needs to obtain even and aerated windrows. The two rotors are equipped with ten flexible tines each. During operation, tines are set level due to centrifugal force. To obtain perfect turning and windrowing, one tine out of two provides a wider opening to increase the worked area and to allow passage in a very thick hay.

Standard Equipment: 3 pt hitch self centres & locks when lifted, teeth adjust for raking & tedding, 20 double teeth, 180 rpm @ 540 PTO rotor, 2′-7″ high, 15×6-6 ply flotation tires

Detail Description
Model HM300
Description HayMaker Tedder 9′-11″ Working Width, 7′-6″ Transport Width, 20 HP
Weight 726 Lbs